Authors: G Sai Rahul, A Dilipy, Rajeev Raushanz
An aircraft wing is actually manufactured by the composite materials with the fibre angled in every ply aligned in multi- direction. Dissimilar thickness of the airfoil and layer directions were almost taken to study the result of bending-torsion. These laminated features are usually designed using the different layers, sequence of stacking, geometrical and mechanical properties. Finite number of layers can be integrated to form many laminates, The wing loading was due to its self-weight and weight of other propulsion systems or due to acceleration due to gravity was deliberated and the deflection over here can be found, this actually studied by aero elasticity. The aircraft wing is severely affected by the loads on along wing direction or vertical direction.NACA 2412 airfoil was taken for designing wing, and it was scaled through a profile with a calculated wingspan to obtain wing model. FLUENT and CFX were used for computational fluid dynamic analysis to determine the lift and drag for wing during zero degreed flaps and angled flaps. By this we intend to show how fast retraction flaps effects the drag and lift of aircraft at cruising speed.
Comments: 9 Pages.
Download: PDF
[v1] 2016-08-20 07:45:46
Unique-IP document downloads: 1674 times
Vixra.org is a pre-print repository rather than a journal. Articles hosted may not yet have been verified by peer-review and should be treated as preliminary. In particular, anything that appears to include financial or legal advice or proposed medical treatments should be treated with due caution. Vixra.org will not be responsible for any consequences of actions that result from any form of use of any documents on this website.
Add your own feedback and questions here:
You are equally welcome to be positive or negative about any paper but please be polite. If you are being critical you must mention at least one specific error, otherwise your comment will be deleted as unhelpful.