Authors: Basim Khalaf Jarullah Al-Shammari
This paper presents a design of microstrip antenna for IEEE 802.11b and for IEEE 802.11g using a nearly square patch antenna, excited by a standard miniature adapter probe feed line. The patch and ground plane are separated by a substrate; the radiating patch is loaded by a central shorting pin and feeding probe loaded by a series capacitor. This antenna has a wide bandwidth in the frequency band of (WLAN) and with a return loss ≤ −10 dB from 2.4 GHz to 2.48 GHz exhibits circularly polarized far-field radiation pattern. The proposed antennas have been simulated and analyzed using method of moments (MoM) based software package Microwave Office 2008 v8.0. The results show that the bandwidth of the antenna increases by using reactive load. The simulated gain of the antenna is over 6 dB. IEEE802.11b و IEEE802.11g
Comments: 6 Pages.
[v1] 2017-12-13 15:09:00
Unique-IP document downloads: 14 times
Vixra.org is a pre-print repository rather than a journal. Articles hosted may not yet have been verified by peer-review and should be treated as preliminary. In particular, anything that appears to include financial or legal advice or proposed medical treatments should be treated with due caution. Vixra.org will not be responsible for any consequences of actions that result from any form of use of any documents on this website.
Add your own feedback and questions here:
You are equally welcome to be positive or negative about any paper but please be polite. If you are being critical you must mention at least one specific error, otherwise your comment will be deleted as unhelpful.