Authors: Kenneth C. Johnson
The accuracy of precision diamond turning is limited by stage interferometers, which do not provide a direct measure of the cutting tool proximity to the workpiece or the depth of cut. When making shallow trim cuts on a previously machined part, accuracy can be greatly increased by using a proximity or depth sensor on or close to the tool for position servo control. Further improvements in both surface form and finish can be made by machining a pattern into a sacrificial layer, which is then transferred into the workpiece by a selective etch process. These techniques are particularly useful for EUV and X-ray mirrors and gratings.
Comments: 4 Pages.
[v1] 2018-09-21 02:46:46
Unique-IP document downloads: 0 times
Vixra.org is a pre-print repository rather than a journal. Articles hosted may not yet have been verified by peer-review and should be treated as preliminary. In particular, anything that appears to include financial or legal advice or proposed medical treatments should be treated with due caution. Vixra.org will not be responsible for any consequences of actions that result from any form of use of any documents on this website.
Add your own feedback and questions here:
You are equally welcome to be positive or negative about any paper but please be polite. If you are being critical you must mention at least one specific error, otherwise your comment will be deleted as unhelpful.