Chemistry

1607 Submissions

[23] viXra:1607.0568 [pdf] submitted on 2016-07-31 23:18:09

Physical, Thermal and Spectral Properties of Biofield Energy Treated 2,4-Dihydroxybenzophenone

Authors: Mahendra Kumar Trivedi, Alice Branton, Dahryn Trivedi, Gopal Nayak
Comments: 8 Pages.

Study background: 2,4-Dihydroxybenzophenone (DHBP) is an organic compound used for the synthesis of pharmaceutical agents. The objective of this study was to investigate the influence of biofield energy treatment on the physical, thermal and spectral properties of DHBP. The study was performed in two groups (control and treated). The control group remained as untreated, and the treated group received Mr. Trivedi’s biofield energy treatment. Methods: The control and treated DHBP samples were further characterized by X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), laser particle size analyser, surface area analyser, Fourier transform infrared (FT-IR) spectroscopy, and ultra violet-visible spectroscopy (UV-vis) analysis. Results: The XRD study indicated a slight decrease in the volume of the unit cell and molecular weight of treated DHBP as compared to the control sample. However, XRD study revealed an increase in average crystallite size of the treated DHBP by 32.73% as compared to the control sample. The DSC characterization showed no significant change in the melting temperature of treated sample. The latent heat of fusion of the treated DHBP was substantially increased by 11.67% as compared to the control. However, TGA analysis showed a decrease in the maximum thermal decomposition temperature (Tmax) of the treated DHBP (257.66º C) as compared to the control sample (260.93º C). The particle size analysis showed a substantial increase in particle size (d50 and d99) of the treated DHBP by 41% and 15.8% as compared to the control sample. Additionally, the surface area analysis showed a decrease in surface area by 9.5% in the treated DHBP, which was supported by the particle size results. Nevertheless, FT-IR analysis showed a downward shift of methyl group stretch (2885→2835 cm-1) in the treated sample as compared to the control. The UV analysis showed a blue shift of absorption peak 323→318 nm in the treated sample (T1) as compared to the control. Conclusion: Altogether, the results showed significant changes in the physical, thermal and spectral properties of treated DHBP as compared to the control.
Category: Chemistry

[22] viXra:1607.0567 [pdf] submitted on 2016-07-31 23:23:57

Investigation of Biofield Treatment on Antimicrobial Susceptibility, Biochemical Reaction Pattern and Biotyping of Enteropathogenic Multidrug-Resistant Escherichia Coli Isolates

Authors: Mahendra Kumar Trivedi, Alice Branton, Dahryn Trivedi, Gopal Nayak
Comments: 8 Pages.

Study background: Multidrug resistant Escherichia coli (MDR E. coli) has become a major health concern, and failure of treatment leads to huge health burden. Aim of the present study was to determine the impact of Mr. Trivedi’s biofield treatment on E. coli. Methods: Four MDR clinical lab isolates (LSs) of E. coli (LS 8, LS 9, LS 10, and LS 11) were taken and divided into two groups i.e. control and biofield treated. Control and treated samples were identified with respect to its antimicrobial sensitivity assay, biochemical study and biotype number using MicroScan Walk-Away® system. The analysis was done on day 10 after biofield treatment and compared with its respective control group. Results: Antimicrobial sensitivity assay showed 50% alteration in sensitivity of total tested antimicrobials in treated group of MDR E. coli isolates. MIC results showed the alteration in MIC of about 40.63% antimicrobials out of thirty two tested antimicrobials, after biofield treatment in clinical isolates of E. coli. Ticarcillin/k-clavulanate showed improved sensitivity (R → I) with decreased MIC value in LS 9 as compared to control. A fourfold and twofold decreased in MIC values were reported in case of piperacillin/tazobactam (in LS 9) and chloramphenicol (in LS 8), respectively as compared to respective control. Biochemical study showed a 39.39% alteration in biochemical reactions after treatment among four isolates of E. coli as compared to control. A significant change in biotype numbers were reported in three clinical isolates (i.e. LS 8, LS 9, and LS 11) of MDR E. coli as compared to control. On the basis of changed biotype number (7774 5272) after biofield treatment, organism with maximum probability was identified as Enterobacter aerogenes in LS 8 as compared to control, (E. coli, 7711 5012). Conclusion: Overall results suggest that Mr Trivedi’s biofield treatment has a significant effect on altering the antimicrobial sensitivity, biochemical reactions and biotype number of MDR isolates of E. coli.
Category: Chemistry

[21] viXra:1607.0566 [pdf] submitted on 2016-07-31 23:26:05

Isotopic Abundance Ratio Analysis of 1,2,3-Trimethoxybenzene (TMB) After Biofield Energy Treatment (The Trivedi Effect® ) Using Gas Chromatography-Mass Spectrometry

Authors: Mahendra Kumar Trivedi, Alice Branton, Dahryn Trivedi, Gopal Nayak
Comments: 9 Pages.

1,2,3-Trimethoxybenzene (TMB) is one of the most versatile chemical used for the synthesis of several pharmaceuticals, dyes, polymers, organic compounds, etc. The stable isotope ratio analysis has increased attention day-by-days in several fields such as agricultural, food authenticity, biochemistry, medical research, etc. The current study was aimed to evaluate the effect of the biofield energy treatment on the isotopic abundance ratios of 13C/12C or 2H/1H or 17O/16O (PM+1/PM) and 18O/16O (PM+2/PM) in TMB using Gas chromatography - mass spectrometry (GC-MS) technique. TMB was divided into two parts - one part was denoted as control and another part was referred as biofield energy treated sample that was received through Mr. Trivediꞌs unique biofield energy (The Trivedi Effect® ). The GC-MS of the biofield treated TMB was characterized at different time intervals considered as T1, T2, T3, and T4 to examine the impact of the biofield energy treatment on isotopic abundance ratio with respect to the time. The GC-MS spectra of the both control and biofield treated TMB exhibited the presence of molecular ion peak [M+ ] at m/z 168 (calculated 168.08 for C9H12O3) along with similar pattern of fragmentation. The relative peak intensities of the fragmented ions in the biofield treated TMB, particularly at T2 and T3 was altered from the control sample. The isotopic abundance ratio analysis in the biofield treated TMB exhibited that the isotopic abundance ratio of PM+1/PM in the biofield treated TMB at T2 and T3 was significantly enhanced by 128.13 and 117.99%, respectively with respect to the control sample. Consequently, the percentage change in isotopic abundance ratio of PM+2/PM was significantly increased in the biofield treated TMB at T2 and T3 by 125.93 and 116.67%, respectively as compared with the control TMB. The isotopic abundance ratios (PM+1/PM and PM+2/PM) in the biofield treated TMB at T1 and T4 was altered with respect to the control TMB. In summary, 13C, 2H, and 17O contributions from (C9H12O3) + to m/z 169 and 18O contribution from (C9H12O3) + to m/z 170 for the biofield treated TMB, particularly at T2 and T3 were significantly improved and biofield treated TMB might exhibit changed isotope effects as compared to the control sample. The biofield treated TMB might assist to develop new chemicals and pharmaceuticals through using its kinetic isotope effects like understanding the reaction mechanism, the enzymatic transition state and all aspects of enzyme mechanisms.
Category: Chemistry

[20] viXra:1607.0547 [pdf] submitted on 2016-07-28 23:12:06

Physical, Thermal and Spectral Properties of Biofield Treated 1,2,3-Trimethoxybenzene

Authors: Mahendra Kumar Trivedi, Alice Branton, Dahryn Trivedi, Gopal Nayak
Comments: 8 Pages.

Study background: 1,2,3-Trimethoxybenzene is an important compound used for the synthesis of chemicals and pharmaceutical agents. The objective of this study was to investigate the influence of biofield energy treatment on the physical, thermal and spectral properties of 1,2,3-trimethoxybenzene. Methods: The study was performed by dividing the sample into two groups (control and treated). The control group remained as untreated, while the treated group received Mr Trivedi’s biofield energy treatment. The control and treated 1,2,3-trimethoxybenzene samples were then characterized by X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), Fourier transform infrared (FT-IR) spectroscopy, and ultra violetvisible spectroscopy (UV-Vis) analysis. Results: XRD studies revealed the significant increase in crystallite size of treated sample by 45.96% as compared to the control sample. DSC analysis showed a decrease in melting temperature of the treated sample (45.93ºC) with respect to control (46.58ºC). Additionally, the substantial change was evidenced in latent heat of fusion of treated sample by 64.18% as compared to the control. TGA analysis indicated a decrease in maximum thermal decomposition temperature (Tmax) of treated sample (151.92ºC) as compared to the control sample (154.43ºC). This indicated the decrease in thermal stability of the treated sample as compared to the control. FT-IR spectroscopic analysis showed an increase in the frequency of C-O bond in treated sample (1105→1174 cm-1) as compared to the control sample. However, UV analysis showed no changes in absorption peaks in treated sample as compared to the untreated sample. Conclusion: Overall, the result indicated that biofield energy treatment has altered the physical, thermal and spectral properties of the treated sample as compared to control. Hence, the treated sample could be used as an intermediate in the synthesis of organic compounds.
Category: Chemistry

[19] viXra:1607.0546 [pdf] submitted on 2016-07-28 23:14:10

Physical, Thermal and Spectroscopic Studies of Biofield Treated P-Chlorobenzonitrile

Authors: Mahendra Kumar Trivedi, Alice Branton, Dahryn Trivedi, Gopal Nayak
Comments: 7 Pages.

Para-chlorobenzonitrile (p-CBN) is widely used as a chemical intermediate in the manufacturing of dyes, medicines, and pesticides, however; sometimes it may cause runaway reactions at high temperatures. The current study was designed to evaluate the impact of biofield energy treatment on the physical, thermal, and spectroscopic properties of p-CBN. The analysis was done by dividing the p-CBN samples into two groups that served as control and treated. The treated group received Mr. Trivedi’s biofield treatment. Subsequently, the control and treated samples were evaluated using various analytical techniques such as X-ray diffraction (XRD), surface area analyser, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), Fourier-transform infrared (FT-IR) and UV-visible (UV-Vis) spectroscopy. The XRD results showed an increase in the crystallite size (66.18 nm) of the treated sample as compared to the control sample (53.63 nm). The surface area analysis of the treated sample also showed 14.19% decrease in the surface area as compared to control. Furthermore, DSC analysis results showed that the latent heat of fusion of the treated p-CBN increased considerably by 5.94% as compared to control. However, the melting temperature of the treated sample did not show any considerable change from the control sample. Besides, TGA/DTG studies showed that Tmax (the temperature at which the sample lost its maximum weight) was increased by 5.22% along with an increase in its onset of thermal decomposition temperature i.e. 96.80°C in the biofield treated p-CBN as compared to the control sample (84.65°C). This indicates that the thermal stability of treated p-CBN sample might increase as compared to the control sample. However, no change was found in the FT-IR and UV-Vis spectroscopic character of the treated p-CBN as compared to the control. These findings suggest that the biofield treatment significantly altered the physical and thermal properties of p-CBN, which could make it more useful as a chemical intermediate.
Category: Chemistry

[18] viXra:1607.0545 [pdf] submitted on 2016-07-28 23:15:32

Characterization of Physical, Thermal and Spectral Properties of Biofield Treated 2, 6-Diaminopyridine

Authors: Mahendra Kumar Trivedi, Alice Branton, Dahryn Trivedi, Gopal Nayak
Comments: 7 Pages.

2, 6-Diaminopyridine (2, 6-DAP) has extensive use in synthesis of pharmaceutical compounds. The objective of present research was to investigate the influence of biofield treatment on physical, thermal and spectral properties of 2, 6-DAP. The study was performed in two groups, control and treated. The control group remained as untreated, and biofield treatment was given to treatment group. The control and treated 2, 6-DAP samples were characterized by X-ray diffraction (XRD), Differential scanning calorimetry (DSC), Thermo gravimetric analysis (TGA), Laser particle size analyzer, surface area analyzer, Fourier transform infrared (FT-IR) spectroscopy, and UV-visible spectroscopy. XRD analysis revealed decrease in intensity of the peaks of treated 2, 6-DAP with respect to control. Unit cell volume and molecular weight were decreased by 2.97% and 2.98% respectively in treated 2, 6-DAP as compared to control. Crystallite size was decreased by 24.70% in treated 2, 6-DAP with respect to control. DSC analysis showed no significant change in melting temperature of treated 2, 6-DAP with respect to control. Nevertheless, the treated 2, 6-DAP showed significant increase in latent heat of fusion by 35.52% as compared to control 2, 6-DAP. TGA analysis showed decrease in percent weight loss of the treated 2, 6-DAP in comparison with control. Additionally, substantial increase in maximum thermal decomposition temperature (Tmax) was observed in treated 2, 6-DAP (203.52°C) as compared with control 2, 6-DAP (186.84°C). Particle size analysis results showed a substantial decrease in d50 (average particle size) and d99 (size exhibited by 99% of the particles) of the treated 2, 6-DAP by 20.5 and 57.4%, respectively as compared to control. Additionally, the BET analysis showed substantial increase in surface area of treated 2, 6-DAP by 75.58% as compared to control. FT-IR spectrum of treated 2, 6-DAP showed alteration in O-H stretching (3390→3370 cm-1), C-H stretching (3132→3138 cm-1) and N-H bending (1637→1604 cm-1) vibration peaks with respect to control. However, UV-visible analysis of treated 2, 6-DAP showed no significant changes in absorption peaks (λ max) with respect to control. Overall, the results demonstrated that biofield has significant impact on the physical, thermal and spectral properties of the treated 2, 6-DAP.
Category: Chemistry

[17] viXra:1607.0530 [pdf] submitted on 2016-07-27 23:23:29

Physical, Thermal, and Spectroscopic Characterization of Biofield Energy Treated Methyl-2-Naphthyl Ether

Authors: Mahendra Kumar Trivedi, Alice Branton, Dahryn Trivedi, Gopal Nayak
Comments: 8 Pages.

Methyl-2-naphthyl ether (MNE) is an organic compound and used as the primary moiety for the synthesis of several antimicrobial and anti-inflammatory agents. This study was attempted to evaluate the impact of biofield energy treatment on the physical, thermal, and spectroscopic properties of MNE. The study was carried out in two groups i.e., control and treated. The treated group was subjected to Mr. Trivedi’s biofield treatment. Afterward, the control and treated samples of MNE were evaluated using X-ray diffraction (XRD), surface area analyzer, differential scanning calorimetry (DSC), thermogravimetric analysis-derivative thermogravimetric analysis (TGA-DTG), Fourier transform infrared (FTIR), and ultraviolet-visible (UV-Vis) spectroscopy. The XRD study exhibited the decrease in average crystallite size by 30.70%. The surface area analysis showed 5.32% decrease in surface area of the treated sample with respect to the control. The DSC thermogram of treated MNE exhibited no significant change in the melting temperature; however, the latent heat of fusion was slightly increased (0.83%) after biofield treatment as compared to the control sample. The TGA analysis showed the onset temperature of thermal degradation at 158℃ in the control sample that was reduced to 124℃ after biofield treatment. The result showed about 21.52% decrease in onset temperature of thermal degradation of treated MNE as compared to the control. Similarly, the end-set temperature of thermal degradation was also reduced by 13.51% after biofield treatment with respect to the control. The FT-IR and UV spectroscopic studies did not show any changes in the wavenumber and wavelength, respectively in treated MNE with respect to the control. Overall, the XRD, surface area and thermal analysis suggest that biofield treatment has the impact on physical and thermal properties of the treated MNE as compared to the control.
Category: Chemistry

[16] viXra:1607.0529 [pdf] submitted on 2016-07-27 23:26:21

Physical, Thermal and Spectral Properties of Biofield Treated 3-Nitroacetophenone

Authors: Mahendra Kumar Trivedi, Alice Branton, Dahryn Trivedi, Gopal Nayak
Comments: 9 Pages.

3-Nitroacetophenone (3-NAP) is an organic compound used as an intermediate for the synthesis of pharmaceutical agents. The aim of this study was to evaluate the impact of biofield energy treatment on the physical, thermal and spectral properties of 3-NAP. The study was performed in two groups i.e. control and treated. The control group remained as untreated, and the treated group received Mr. Trivedi’s biofield energy treatment. The control and treated 3-NAP samples were further characterized by X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), laser particle size analyzer, surface area analyzer, Fourier transform infrared (FT-IR) spectroscopy, and ultra violet-visible spectroscopy (UV-vis) analysis. The XRD analysis showed decrease in crystallite size of treated 3-NAP by 20.27% as compared to the control sample. However, the XRD peaks of treated sample showed an increase in intensity as compared to the control. The DSC result showed a slight increase in melting temperature of treated 3-NAP (80.75ºC) with respect to the control (79.39ºC). The latent heat of fusion of treated 3-NAP was changed by 16.28% as compared to the control sample. The TGA analysis showed an increase in onset temperature of treated sample (192ºC) as compared to the control sample (182ºC). Further, the maximum thermal decomposition temperature (Tmax) of treated 3-NAP was increased as compared to the control. This showed the increase in thermal stability of treated 3-NAP with respect to control. The treated 3-NAP showed an increase in average particle size (d50) by 27.6% along with an increase in size exhibited by 99% of particles (d99) by 4.9% as compared to the control. Brunauer-Emmett-Teller (BET) analysis showed a substantial decrease in surface area by 24.6% with respect to the control. The FT-IR analysis showed an emergence of peak at 1558 cm-1 in treated 3-NAP sample as compared to the control. Nevertheless, the UV spectral analysis of treated 3-NAP showed no alterations in absorption peaks as compared to the control. Altogether, the result showed that biofield energy treatment has altered the physical, thermal and spectral properties of treated 3-NAP as compared to the control.
Category: Chemistry

[15] viXra:1607.0492 [pdf] submitted on 2016-07-26 23:29:29

Evaluation of Isotopic Abundance Ratio in Biofield Energy Treated Nitrophenol Derivatives Using Gas Chromatography-Mass Spectrometry

Authors: Mahendra Kumar Trivedi, Alice Branton, Dahryn Trivedi, Gopal Nayak
Comments: 10 Pages.

Nitrophenols are the synthetic organic chemicals used for the preparation of synthetic intermediates, organophosphorus pesticides, and pharmaceuticals. The objective of the present study was to evaluate the effect of biofield energy treatment on the isotopic abundance ratios of PM+1/PM, and PM+2/PM in o- and m-nitrophenol using the gas chromatography-mass spectrometry. The o- and m-nitrophenol were divided into two parts - one part was control sample, and another part was considered as biofield energy treated sample, which received Mr. Trivedi’s biofield energy treatment (The Trivedi Effect® ). The biofield energy treated nitrophenols having analyzed at different time intervals were designated as T1, T2, T3, and T4. The GCMS analysis of both the control and biofield treated samples indicated the presence of the parent molecular ion peak of o- and mnitrophenol (C6H5NO3 + ) at m/z 139 along with major fragmentation peaks at m/z 122, 109, 93, 81, 65, and 39. The relative peak intensities of the fragmented ions in the biofield treated o- and m-nitrophenol were notably changed as compared to the control sample with respect to the time. The isotopic abundance ratio analysis using GC-MS revealed that the isotopic abundance ratio of PM+1/PM in the biofield energy treated o-nitrophenol at T2 and T3 was significantly increased by 14.48 and 86.49%, respectively as compared to the control sample. Consequently, the isotopic abundance ratio of PM+2/PM in the biofield energy treated sample at T2 and T3 was increased by 11.36, and 82.95%, respectively as compared to the control sample. Similarly, in m-nitrophenol, the isotopic abundance ratio of PM+1/PM in the biofield energy treated sample at T1, T3, and T4 was increased by 5.82, 5.09, and 6.40%, respectively as compared to the control sample. Subsequently, the isotopic abundance ratio of PM+2/PM at T1, T2, T3 and T4 in the biofield energy treated m-nitrophenol was increased by 6.33, 3.80, 16.46, and 16.46%, respectively as compared to the control sample. Overall, the isotopic abundance ratios of PM+1/PM (2H/1H or 13C/12C or 15N/14N or 17O/16O), and PM+2/PM (18O/16O) were altered in the biofield energy treated o- and m-nitrophenol as compared to the control increased in most of the cases. The biofield treated o- and m-nitrophenol that have improved isotopic abundance ratios might have altered the physicochemical properties and could be useful in pharmaceutical and chemical industries as an intermediate in the manufacturing of pharmaceuticals and other useful chemicals for the industrial application.
Category: Chemistry

[14] viXra:1607.0477 [pdf] submitted on 2016-07-25 07:39:40

Mass Spectrometric Analysis of Isotopic Abundance Ratio in Biofield Energy Treated Thymol

Authors: Mahendra Kumar Trivedi, Alice Branton, Dahryn Trivedi, Gopal Nayak
Comments: 8 Pages.

Thymol is a natural monoterpenoid phenol possessing various pharmacological activities such as antimicrobial, antioxidant, etc. The stable isotope ratio analysis has drawn attention in numerous fields such as agricultural, food authenticity, biochemistry, metabolism, medical research, etc. An investigation of the effect of the biofield energy treatment (The Trivedi Effect® ) on the isotopic abundance ratios of PM+1/PM and PM+2/PM in thymol using gas chromatography - mass spectrometry was attempted in this study. The sample, thymol was divided into two parts - one part was denoted as control and another part was referred as biofield energy treated sample that was given Mr. Trivediꞌs unique biofield energy. T1, T2, T3, and T4 were represented to different time interval analysis of the biofield treated thymol. The GC-MS spectra of the both control and biofield treated thymol indicated the presence of molecular ion peak [M+ ] at m/z 150 (calculated 150.10 for C10H14O) along with the similar pattern of fragmentation. The relative intensities of the parent molecule and other fragmented ions of the biofield treated thymol were enhanced as compared to the control thymol. The percentage change of the isotopic abundance ratio of PM+1/PM in the biofield treated thymol at T1, T2, T3 and T4 was increased by 3.25, 6.31, 96.75, and 140.25%, respectively as compared to the control thymol. In addition, the percentage change of the isotopic abundance ratio of PM+2/PM was increased in the biofield treated thymol at T1, T2, T3, and T4 by 5.33, 8.00, 101.33, and 140.00%, respectively with respect to the control sample. In summary, 13C, 2H, and 17O contributions from (C10H14O)+ to m/z 151 and 18O contribution from (C10H14O)+ to m/z 152 in the biofield treated thymol were significantly increased gradually with respect to the time and was found that biofield energy treatment has time dependent effect on it. Hence, the biofield energy treated thymol might display altered isotope effects such as physicochemical and thermal properties, binding energy and the reaction kinetics with respect to the control sample. So, biofield energy treated thymol could be advantageous for designing the synthetic scheme for the preparation of pharmaceuticals through its kinetic isotope effects. Besides, biofield treated thymol might be useful to overcome the problems associated with thymol for e.g. pungent flavor, high dose requirement for the activity through understanding its isotope effects and the determination of its pharmacokinetic profile, bioavailability.
Category: Chemistry

[13] viXra:1607.0425 [pdf] submitted on 2016-07-22 23:30:02

Antimicrobial Susceptibility, Biochemical Characterization and Molecular Typing of Biofield Treated Klebsiella Pneumoniae

Authors: Mahendra Kumar Trivedi, Alice Branton, Dahryn Trivedi, Gopal Nayak
Comments: 7 Pages.

Pathogenic isolates of Klebsiella pneumoniae (K. pneumoniae), particularly the extended-spectrum β-lactamase (ESBL) producing strains, are mostly associated with the failure of antibiotic therapy in nosocomial infections. The present work was designed to evaluate the impact of Mr. Trivedi’s biofield energy treatment on phenotypic and genotypic characteristics of K. pneumoniae. The strain of K. pneumoniae bearing ATCC 15380 (American Type Culture Collection) was procured from the Bangalore Genei, in sealed pack and divided into control and treated groups. Treated group was subjected to Mr. Trivedi’s biofield energy treatment and analyzed for the antimicrobial susceptibility, minimum inhibitory concentration (MIC), biochemical reactions, and biotyping using automated MicroScan Walk-Away® system. Further, the effect of biofield treatment was also evaluated using Random Amplified Polymorphic DNA (RAPD) in order to determine their epidemiological relatedness and genetic characteristics of biofield treated K. pneumoniae samples. The antimicrobial susceptibility results showed an improve sensitivity (i.e. from intermediate to susceptible) of ampicillin/sulbactam and chloramphenicol, while altered sensitivity of cephalothin (i.e. from susceptible to intermediate) was also reported as compared to the control sample. The MIC value showed two-fold decrease in MIC value of ampicillin/sulbactam (i.e. 16/8 to ≤8/4 µg/mL) and chloramphenicol (i.e. 16 to ≤ 8 µg/mL) as compared to the control. The cephalothin showed two-folds change (i.e. ≤ 8 to 16 µg/mL) in the MIC value as compared with the control. Biofield treatment showed 9.09% alterations in biochemical reactions followed by a change in biotype number (7774 4272) in the treated group with respect to the control (7774 4274). Genetic fingerprinting was performed on control and treated samples using RAPD-PCR biomarkers, which showed an average range of 11 to 15% of polymorphism among the treated samples with respect to the control. These results suggested that Mr. Trivedi’s biofield energy treatment has a significant impact on K. pneumoniae.
Category: Chemistry

[12] viXra:1607.0387 [pdf] submitted on 2016-07-20 23:18:00

Bio-field Treatment: An Effective Strategy to Improve the Quality of Beef Extract and Meat Infusion Powder

Authors: Mahendra Kumar Trivedi
Comments: 8 Pages.

The present research work investigated the influence of bio-field treatment on two common flavoring agents used in food industries namely beef extract powder (BEP) and meat infusion powder (MIP). The treated powders were characterized by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), particle size analysis, surface area analysis, differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). The FT-IR results showed disappearance of triglycerides peaks in both the treated powders as compared to control. XRD results corroborated the amorphous nature of both control and treated samples. The BEP showed enhanced average particle size (d50) and d99 (size exhibited by 99% of powder particles) by 5.7% and 16.1%, respectively as compared to control. Contrarily, the MIP showed a decreased particle size (d50; 0.4% and d99; 18.1%) as compared to control. It was assumed that enormous energy was stored in MIP after bio-field treatment that led to fracture into smaller particles. The surface area was increased in both the treated powders. DSC result showed significant increase in melting temperature, in BEP and MIP, which indicated the higher thermal stability of the samples. However, the specific heat capacity (∆H) was decreased in both samples, which was probably due to high energy state of the powders.
Category: Chemistry

[11] viXra:1607.0372 [pdf] submitted on 2016-07-19 23:09:36

Spectroscopic Characterization of Disulfiram and Nicotinic Acid After Biofield Treatment

Authors: Mahendra Kumar Trivedi, Alice Branton, Dahryn Trivedi, Gopal Nayak
Comments: 5 Pages.

Disulfiram is being used clinically as an aid in chronic alcoholism, while nicotinic acid is one of a B-complex vitamin that has cholesterol lowering activity. The aim of present study was to investigate the impact of biofield treatment on spectral properties of disulfiram and nicotinic acid. The study was performed in two groups i.e., control and treatment of each drug. The treatment groups were received Mr. Trivedi’s biofield treatment. Subsequently, spectral properties of control and treated groups of both drugs were studied using Fourier transform infrared (FT-IR) and Ultraviolet-Visible (UV-Vis) spectroscopic techniques. FT-IR spectrum of biofield treated disulfiram showed the shifting in wavenumber of C-H stretching from 1496 to 1506 cm-1 and C-N stretching from 1062 to 1056 cm-1. The intensity of S-S dihedral bending peaks (665 and 553 cm-1) was also increased in biofield treated disulfiram sample, as compared to control. FT-IR spectra of biofield treated nicotinic acid showed the shifting in wavenumber of C-H stretching from 3071 to 3081 cm-1 and 2808 to 2818 cm-1. Likewise, C=C stretching peak was shifted to higher frequency region from 1696 cm-1 to 1703 cm-1 and C-O (COO- ) stretching peak was shifted to lower frequency region from 1186 to 1180 cm-1 in treated nicotinic acid. UV spectrum of control and biofield treated disulfiram showed similar pattern of UV spectra. Whereas, the UV spectrum of biofield treated nicotinic acid exhibited the shifting of absorption maxima (λmax) with respect of control i.e., from 268.4 to 262.0 nm, 262.5 to 256.4, 257.5 to 245.6, and 212.0 to 222.4 nm. Over all, the FT-IR and UV spectroscopy results suggest an impact of biofield treatment on the force constant, bond strength, and dipole moments of treated drugs such as disulfiram and nicotinic acid that could led to change in their chemical stability as compared to control.
Category: Chemistry

[10] viXra:1607.0371 [pdf] submitted on 2016-07-19 23:11:05

Characterization of Physical and Thermal Properties of Biofield Treated Neopentyl Glycol

Authors: Mahendra Kumar Trivedi, Alice Branton, Dahryn Trivedi, Gopal Nayak
Comments: 6 Pages.

Neopentyl glycol (NPG) has been extensively used as solid-solid phase change materials (PCMs) for thermal energy storage applications. The objective of the present study was to evaluate the impact of biofield treatment on physical, spectral and thermal properties of NPG. The study was performed in two groups (control and treated). The control group remained as untreated, and treatment group was subjected to Mr. Trivedi’s biofield treatment. The control and treated NPG were characterized by X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and Fourier transform infrared (FT-IR) spectroscopy. XRD study revealed the decrease in crystallite size of treated NPG by 21.97% as compared to control sample. DSC studies showed slight change in melting temperature of treated NPG as compared to control sample. TGA analysis showed 55.66% weight loss in control NPG however, the treated sample showed reduction in weight loss (44.81%). Additionally, the maximum thermal decomposition temperature (Tmax) of treated NPG (160.40°C) was minimally increased with respect to control sample (159.72°C). This can be inferred as good thermal stability of biofield treated NPG with respect to control. FT-IR spectroscopy showed no structural changes in treated NPG with respect to control sample. The overall results showed that biofield treatment has affected the physical and thermal properties of treated NPG. Moreover, good thermal stability of treated NPG showed that it could be used as phase change materials for thermal energy storage applications.
Category: Chemistry

[9] viXra:1607.0174 [pdf] submitted on 2016-07-14 23:09:48

Bacterial Identification Using 16S Rdna Gene Sequencing and Antibiogram Analysis on Biofield Treated Pseudomonas Fluorescens

Authors: Mahendra Kumar Trivedi, Alice Branton, Dahryn Trivedi, Gopal Nayak
Comments: 9 Pages.

Biofield therapies have been reported to improve the quality of life as compared to other energy medicine. The aim of the study was to evaluate the impact of Mr. Trivedi’s biofield energy treatment on Pseudomonas fluorescens (P. fluorescens) for antimicrobial sensitivity, minimum inhibitory concentration (MIC), biochemical reactions, and biotype number. P. fluorescens cells were procured from MicroBioLogics Inc., USA in sealed packs bearing the American Type Culture Collection (ATCC 49838) number and divided in control and treated group. The effect was evaluated on day 10, and 159 after biofield treatment in lyophilized state. Further study was performed on day 5, 10, and 15 after retreatment on day 159 in revived state as per study design. All experimental parameters were studied using automated MicroScan Walk-Away® system. The 16S rDNA sequencing was carried out to correlate the phylogenetic relationship of P. fluorescens with other bacterial species after treatment. The results showed improved sensitivities and decreased MIC value of aztreonam, cefepime, moxifloxacin, and tetracycline in revived and lyophilized treated sample with respect to the control. Arginine, cetrimide, kanamycin, and glucose showed altered biochemical reactions after biofield treatment with respect to control. Biotype numbers were altered along with species in lyophilized as well as in revived group. Based on nucleotides homology and phylogenetic analysis using 16S rDNA gene sequencing, treated sample was detected to be Pseudomonas entomophila (GenBank Accession Number: AY907566) with 96% identity of gene sequencing data, which was nearest homolog species to P. fluorescens (Accession No. EF672049). These findings suggest that Mr. Trivedi’s unique biofield treatment has the capability to alter changes in pathogenic P. fluorescens even in the lyophilized storage condition and can be used to modify the sensitivity of microbes against antimicrobials.
Category: Chemistry

[8] viXra:1607.0157 [pdf] submitted on 2016-07-13 01:18:25

Influence of Biofield Treatment on Physical and Structural Characteristics of Barium Oxide and Zinc Sulfide

Authors: Mahendra Kumar Trivedi, Alice Branton, Dahryn Trivedi, Gopal Nayak
Comments: 7 Pages.

Barium oxide (BaO) and zinc sulfide (ZnS) are well known for their applications in electrical, optical and chemical industries. The present study was aimed to evaluate the impact of biofield treatment on the structural and physical properties of BaO and ZnS powder. The study was carried out in two groups, one was set to control, and another group was subjected to Mr. Trivedi’s biofield treatment. Control and treated samples of BaO and ZnS were analyzed using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), and surface area analyzer. XRD data showed that lattice parameter and unit cell volume of BaO powder were reduced upto 0.42% and 1.26%, respectively as compared to control. Whereas, density of treated BaO was increased upto 1.27% as compared to control. Besides, the unit cell volume was changed in treated ZnS from -0.55 to 0.24% as compared to control that led to change in density from -0.24 to 0.55% after biofield treatment. However, the crystallite size was substantially increased upto 40.5% and 71.4% in treated BaO and ZnS, respectively as compared to control. FT-IR data exhibited that absorption peaks at wavenumber 862/cm (control) was shifted to 858/cm in treated BaO. Upward shifting of absorption peaks corresponding to Zn-S stretching bond was observed in treated (617/cm) as compared to control (592/cm). Furthermore, surface area result showed that it was reduced by 4.32% and 2.1% in treated BaO and ZnS powder, respectively as compared to control. Hence, these, findings suggest that biofield treatment has altered the structural and physical properties of BaO and ZnS powders.
Category: Chemistry

[7] viXra:1607.0090 [pdf] submitted on 2016-07-07 23:33:08

Effect of Biofield Treatment on Phenotypic and Genotypic Characteristic of Provindencia Rettgeri

Authors: Mahendra Kumar Trivedi
Comments: 6 Pages.

Providencia rettgeri (P. rettgeri) is a clinically significant Gram-negative bacterium of genus Providencia, and commonly associated with hospital-acquired infection like urinary tract infection (UTI), gastroenteritis, and ocular infections. Present study was designed to evaluate the effect of biofield treatment on P. rettgeri against antimicrobial susceptibility, biochemical reaction pattern, biotype number, and 16S rDNA sequence. The samples of P. rettgeri (ATCC 9250) were divided into three groups: Gr.I (control), Gr.II (treatment, revived), and Gr.III (treatment, lyophilized). The Gr.II and III were treated with Mr. Trivedi’s biofield, and then subsequently characterized for antimicrobial susceptibility, minimum inhibitory concentration (MIC), biochemical reactions, and biotype numbering. The 16S rDNA sequencing was carried out to correlate the phylogenetic relationship of P. rettgeri with other bacterial species. The treated cells of P. rettgeri showed an alteration in susceptibility of about 50% and 53.3% tested antimicrobials of Gr.II on day 5 and 10, respectively; and 53.3% of tested antimicrobials of Gr.III on day 10. MIC results showed a significant decrease in MIC values of 53.1, 56.3, and 56.3% antimicrobials in Gr.II on day 5, Gr.II on day 10, and Gr.III on day 10, respectively, as compared to control. The significant changes in biochemical reactions and biotype numbers were also observed in all the treated groups of P. rettgeri. Based on nucleotides homology and phylogenetic analysis the P. rettgeri was found to be Proteus mirabilis (GenBank Accession Number: AY820623) and nearest homolog species was found to be Proteus vulgaris (Accession No. DQ499636). These findings suggest that biofield treatment can prevent the emergence of absolute resistance of existing antimicrobials to P. rettgeri.
Category: Chemistry

[6] viXra:1607.0078 [pdf] submitted on 2016-07-06 23:29:51

Evaluation of the Isotopic Abundance Ratio in Biofield Energy Treated Resorcinol Using Gas Chromatography-Mass Spectrometry Technique

Authors: Mahendra Kumar Trivedi
Comments: 7 Pages.

The stable isotope ratio analysis is widely used in several scientific fields such as agricultural, food authenticity, biochemistry, metabolism, medical research, etc. Resorcinol is one of the most versatile chemicals used for the synthesis of several pharmaceuticals, dyes, polymers, organic compounds, etc. The current research work was designed to investigate the impact of the biofield energy treatment on the isotopic abundance ratios of 13C/12C or 2H/1H or 17O/16O (PM+1/PM) and 18O/16O (PM+2/PM) in resorcinol using Gas chromatograph - mass spectrometry (GC-MS) technique. Resorcinol was divided into two parts - one part was control and another part was considered as biofield energy treated sample. The biofield energy treatment was accomplished through unique biofield energy transmission by Mr. Mahendra Kumar Trivedi (also called as The Trivedi Effect®). T1, T2, T3, and T4 were denoted by different time interval analysis of the biofield treated resorcinol in order to understand the influence of the biofield energy treatment on isotopic abundance ratio with respect to the time. The GC-MS spectra of the both control and biofield treated resorcinol exhibited the presence of molecular ion peak [M+ ] at m/z 110 (calculated 110.04 for C6H6O2) along with major fragmented peaks at m/z 82, 81, 69, 53, and 39. The relative peak intensities of the fragmented ions in biofield treated resorcinol (particularly T2) was significantly changed with respect to the control sample. The stable isotope ratio analysis in resorcinol using GC-MS revealed that the percentage change of the isotopic abundance ratio of PM+1/PM was increased in the biofield treated resorcinol at T1, T2, T3 and T4 by 1.77%, 165.73%, 0.74%, and 6.79%, respectively with respect to the control sample. Consequently, the isotopic abundance ratio of PM+2/PM in the biofield treated resorcinol at T2, T3, and T4 were enhanced by 170.77%, 3.08%, and 12.31%, respectively with respect to the control sample. Briefly, 13C, 2H, 17O contributions from (C6H6O2) + to m/z 111 and 18O contribution from (C6H6O2) + to m/z 112 for the biofield treated resorcinol at T2 and T4 were significantly altered as compared to the control sample. For this reasons, biofield treated resorcinol might exhibit altered physicochemical properties like diffusion velocity, mobility and evaporation rate, reaction rate, binding energy, and stability. Biofield treated resorcinol could be valuable in pharmaceutical and chemical industries as intermediates during the preparation of pharmaceuticals and chemical compounds by altering its physicochemical properties, the reaction rate and selectivity, the study of the reaction mechanism and facilitating in designing extremely effective and specific enzyme inhibitors.
Category: Chemistry

[5] viXra:1607.0060 [pdf] submitted on 2016-07-05 23:20:46

Physical, Thermal and Spectroscopic Characterization of M-Toluic Acid: an Impact of Biofield Treatment

Authors: Mahendra Kumar Trivedi
Comments: 8 Pages.

m-toluic acid (MTA) is widely used in manufacturing of dyes, pharmaceuticals, polymer stabilizers, and insect repellents. The aim of present study was to evaluate the impact of biofield treatment on physical, thermal and spectroscopic properties of MTA. MTA sample was divided into two groups that served as treated and control. The treated group received Mr. Trivedi’s biofield treatment. Subsequently, the control and treated samples were evaluated using X-ray diffraction (XRD), surface area analyser, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), Fourier transform infrared (FT-IR) and ultraviolet-visible (UV-Vis) spectroscopy. XRD result showed a decrease in crystallite size in treated samples i.e. 42.86% in MTA along with the increase in peak intensity as compared to control. However, surface area analysis showed an increase in surface area of 107.14% in treated MTA sample as compared to control. Furthermore, DSC analysis results showed that the latent heat of fusion was considerably reduced by 40.32%, whereas, the melting temperature was increased (2.23%) in treated MTA sample as compared to control. The melting point of treated MTA was found to be 116.04°C as compared to control (113.51°C) sample. Moreover, TGA/DTG studies showed that the control sample lost 56.25% of its weight, whereas, in treated MTA, it was found 58.60%. Also, Tmax (temperature, at which sample lost maximum of its weight) was decreased by 1.97% in treated MTA sample as compared to control. It indicates that the vaporisation temperature of treated MTA sample might decrease as compared to control. The FT-IR and UV-Vis spectra did not show any significant change in spectral properties of treated MTA sample as compared to control. These findings suggest that biofield treatment has significantly altered the physical and thermal properties of m-toluic acid, which could make them more useful as a chemical intermediate.
Category: Chemistry

[4] viXra:1607.0046 [pdf] submitted on 2016-07-04 23:22:41

An Impact of Biofield Treatment: Antimycobacterial Susceptibility Potential Using BACTEC 460/MGIT-TB System

Authors: Mahendra Kumar Trivedi
Comments: 5 Pages.

The aim was to evaluate the impact of biofield treatment modality on mycobacterial strains in relation to antimycobacterials susceptibility. Mycobacterial sensitivity was analysed using 12 B BACTEC vials on the BACTEC 460 TB machine in 39 lab isolates (sputum samples) from stored stock cultures. Two American Type Culture Collection (ATCC) strains were also used to assess the minimum inhibitory concentration (MIC) of antimicrobials (Mycobacterium smegmatis 14468 and Mycobacterium tuberculosis 25177). Rifampicin, ethambutol and streptomycin in treated samples showed increased susceptibility as 3.33%, 3.33% and 400.6%, respectively, as compared to control in extensive drug resistance (XDR) strains. Pyrazinamide showed 300% susceptibility as compared to control in multidrug resistance (MDR) strains. Isoniazide did not show any improvement of susceptibility pattern against treated either in XDR or MDR strains of Mycobacterium as compared to control. Besides susceptibility, the resistance pattern of treated group was reduced in case of isoniazide (26.7%), rifampicin (27.6%), pyrazinamide (31.4%), ethambutol (33.43%) and streptomycin (41.3%) as compared to the untreated group of XDR strains. The MIC values of few antimicrobials were also altered in the treated group of Mycobacterium smegmatis. There was a significant reduction observed in MIC values of linezolid (8.0 to 2.0 µg/ml) and tobramycin (2.0 to 1.0 µg/ml); however, very slight changes occurred in the remaining antimicrobials of treated samples. There was no change of MIC values in the strain of Mycobacterium tuberculosis after biofield treatment. Biofield treatment effect on Mycobacterium against anti-tubercular drugs might be due to altered ligand-receptor/protein interactions at either enzymatic and/or genetic level with respect to anti-mycobacterium susceptibility and MIC values of antimicrobials.
Category: Chemistry

[3] viXra:1607.0037 [pdf] submitted on 2016-07-03 23:17:48

Structural and Physical Properties of Biofield Treated Thymol and Menthol

Authors: Mahendra Kumar Trivedi
Comments: 10 Pages.

Thymol and menthol are naturally occurring plant derived compounds, which have excellent pharmaceutical and antimicrobial applications. The aim of this work was to evaluate the impact of biofield energy on physical and structural characteristics of thymol and menthol. The control and biofield treated compounds (thymol and menthol) were characterized by X-ray diffraction (XRD), Differential Scanning Calorimetry (DSC), Thermogravimetric analysis (TGA), and Fourier Transform Infrared Spectroscopy (FT-IR). XRD study revealed increase in intensity of the XRD peaks of treated thymol, which was correlated to high crystallinity of the treated sample. The treated thymol showed significant increase in crystallite size by 50.01% as compared to control. However, the treated menthol did not show any significant change in crystallite size as compared to control. DSC of treated menthol showed minimal increase in melting temperature (45ºC) as compared to control (44ºC). The enthalpy (∆H) of both the treated compounds (thymol and menthol) was decreased as compared to control samples which could be due the high energy state of the powders. TGA analysis showed that thermal stability of treated thymol was increased as compared to control; though no change in thermal stability was noticed in treated menthol. FT-IR spectrum of treated thymol showed increase in wave number of –OH stretching vibration peak (14 cm-1) as compared to control. Whereas, the FT-IR spectrum of treated menthol showed appearance of new stretching vibration peaks in the region of 3200-3600 cm-1 which may be attributed to the presence of hydrogen bonding in the sample as compared to control. Overall, the result showed that biofield treatment has substantially changed the structural and physical properties of thymol and menthol.
Category: Chemistry

[2] viXra:1607.0022 [pdf] replaced on 2016-11-21 12:58:43

Theory of Three-Electrone Bond in the Four Works with Brief Comments.

Authors: Bezverkhniy Volodymyr Dmytrovych.
Comments: 21 Pages.

Theory of three-electrone bond in the four works: 1. Bezverkhniy V. D. Structure of the benzene molecule on the basis of the three-electron bond. http://vixra.org/pdf/1606.0152v1.pdf 2. Bezverkhniy V. D. Experimental confirmation of the existence of the threeelectron bond and theoretical basis ot its existence. http://vixra.org/pdf/1606.0151v1.pdf 3. Bezverkhniy V. D. A short analysis of chemical bonds. http://vixra.org/pdf/1606.0149v1.pdf 4. Bezverkhniy V. D., Bezverkhniy V. V. Supplement to the theoretical justification of existence of the three-electron bond. http://vixra.org/pdf/1606.0150v1.pdf Nothing prohibits to give a definition of the multiplicity of bond: the multiplicity of bond is the energy of bond expressed in dimensionless units. Hückel rule (4n + 2) for aromatic systems can be written in a different form, in the form of 2n where n - unpaired number. So, we have: 2, 6, 10, 14, 18, etc. This is also true for the electron shells in the atom and aromatic systems. The principle of the interaction of fermions always one, everywhere.
Category: Chemistry

[1] viXra:1607.0018 [pdf] submitted on 2016-07-01 23:20:23

Spectroscopic Characterization of Biofield Treated Metronidazole and Tinidazole

Authors: Mahendra Kumar Trivedi
Comments: 5 Pages.

Metronidazole and tinidazole are widely used antimicrobial drugs against Gram-negative and Gram-positive anaerobic bacteria. The present study was aimed to evaluate the impact of biofield treatment on metronidazole and tinidazole using FT-IR and UV spectroscopy. The study was carried out in two groups i.e. control and treatment. Treatment groups were subjected to Mr. Trivedi’s biofield treatment while no treatment was given to control group. FT-IR spectrum of treated metronidazole showed the impact of biofield treatment on frequency of characteristic functional groups such as C=C (imidazole ring) stretching was appeared at lower frequency i.e. from 1600 cm-1 to 1553 cm-1. Likewise, NO2 asymmetric stretching and C-N symmetric stretching were appeared at higher wave number i.e. 1479 cm-1 to 1501 cm-1 and 1070 cm-1 to 1077 cm-1, respectively. FT-IR spectrum of tinidazole showed shifting in absorption peak of C-N stretching to higher wavenumber from 1002 cm-1 (control) to 1022 cm-1. The wavenumber of aromatic C=C bond (in imidazole) was shifted to lower frequency, which could be due to increases in conjugation effect. Further, increases in wavenumber of NO2 and C-N in treated sample suggested the increased force constant and bond strength as compared to control. Because of higher conjugation effect and increased bond strength, the molecule supposed to be more stable. The UV spectra of both metronidazole and tinidazole showed the similar patterns of lambda max (λmax) with respect to their control. The FT-IR results of both drugs suggest that there was an impact of biofield treatment on atomic level of metronidazole and tinidazole, as compared to control.
Category: Chemistry